•   Raft foundation and framed structure.


  •   Thick solid concrete blocks of standard specifications, quality and brand will be used for block work.


  •   Vitrified tile flooring for the entire flat except toilet & utility.
  •   Designer tiling will be done for toilets as per architect's design. Tiling will be done up to ceiling bottom.
  •   Steps, lift, Facia, lobby & common wall – shall be as per architect's opinion to give maximum uplift of common area.


  •   CCTV for common areas with DVR recording facility at the security kiosk.
  •   Video door phone provision for each flat.


  •   6 High speed elevators (4 passenger and 2 bed elevators) of branded company will be provided.


  •   Toilets: Hot and cold wall mixer, wall mounted white/pastel color EWC, White/pastel color wash basin (without pedestal), one tap. (non-movable parts like bottle trap, waste coupling etc.) Jaguar, Parryware, Hindware or equivalent CP fitting will be used.
  •   Kitchen: Semi-finished kitchen.
  •   Utility: One tap with borewell water and provision for washing machine point.
  •   Angle valves: Will be provided for washing machine point, geyser and Aquaguard point.


  •   Entrance Door: Teak wood frame with teak wood panel door as per architect's design with accessories. (3'6" wide 7' height)
  •   Bedroom Doors: Seasoned wood frame Flush door shutter with accessories. Doors will be of enamel finish. (3' wide 7' height)
  •   Toilet Door: Flush doors with frames will be provided with accessories. Toilet doors will be film coated and painted for water proofing. (2'6" wide 7' height)
  •   Utility and external Doors: core wood frame with hard core panel/moulded door with accessories. (2' 6" wide 7' height)
  •   French Door: Seasoned wood frame with seasoned wood shutters or UPVC Sliding doors
  •   Ventilators: UPVC (Open able - top hung) – Fenesta or equivalent make.
  •   Windows: UPVC (Open able) – Fenesta or equivalent make.
  •   A/C provisions: Provision for split A/C's will be given inside apartment. Entire club house will be air conditioned.


  •   PUTTY WITH EMULSION FINISH: All internal walls of the flat including ceiling will be finished with 2 coats of putty and emulsion over one coat of primer.
  •   CEMENT PAINT: Lift well, lift machine room and common area ceilings.
  •   EXTERIOR EMULSION: External walls and Internal walls of common area as per architect's opinion.
  •   MELAMINE SPRAY POLISH: entrance door
  •   ENAMEL PAINTING: All other doors and grill. (Two coats of enamel paint over one coat of primer)


  •   Concealed copper wiring of RR Kabel, Anchor, Havells or equivalent make with modular plate switches will be provided.
  •   Centralized cabling system for DTH and telephones will be provided.
  •   Wiring shall be done for lighting, 5 amps, 15 amps and A/c points in the apartment.
  •   Switches – All switches shall be Anchor, Roma or equivalent make.
  •   Common areas will be illuminated with sufficient lighting as per requirement.

Our Testimonials:

“Very Friendly and Supportive Staff. Timely process helps to acquire information study.” - Sudhahar & Bhavani.